Reducer Removal

1. Screw a 1/4” bolt extractor (see pictures below) counterclockwise with a pulling motion. The reducer will back out of the bushing.
2. Repeat for the other side.
   
   

Bushing Technology & Inspection | Seals & Foam Rings | Control Direction | Oil Volumes | Structural Inspection | Dropout Thickness Inspection | Torque Values | Unit Conversion | Suspension Tuning Tips | Using the Pump | Important Safety Information | Service Intervals | Contact FOX Service | Warranty Information | FOXHelp Service Web Site

Copyright © 2010
FOX Factory Inc.