SERVICE PROCEDURES
2025-2026 Transfer Neo Simple Grease Service (25 Hour or 1000 Actuations in the FOX BIKE APP)
WARNING: Always wear safety glasses and protective gloves during service to prevent potential injury. Failure to wear protective equipment during service may lead to SERIOUS INJURY OR DEATH.
WARNING: FOX products should be serviced by a qualified bicycle service technician, in accordance with FOX specifications. If you have any doubt whether or not you can properly service your FOX product, then DO NOT attempt it. Improperly serviced products can fail, causing the rider to lose control resulting in SERIOUS INJURY OR DEATH.
WARNING: Modification, improper service, or use of aftermarket replacement parts with FOX forks, shocks, and seatposts may cause the product to malfunction, resulting in SERIOUS INJURY OR DEATH. DO NOT modify any part of a fork, shock, or seatpost including the fork brace (lower leg cross brace), crown, steerer, upper and lower leg tubes, or internal parts, except as instructed herein. Any unauthorized modification may void the warranty, and may cause failure or the fork or shock, resulting in SERIOUS INJURY OR DEATH.
WARNING: FOX products contain pressurized nitrogen, air, oil, or all 3. Misuse can cause property damage, SERIOUS INJURY OR DEATH. DO NOT puncture, incinerate or crush any portion of a FOX product. DO NOT attempt to disassemble any portion of a FOX product, unless expressly instructed to do so by the applicable FOX technical documentation, and then ONLY while strictly adhering to all FOX insturctions and warnings in that instance.
Step 1
Use a small flat driver to carefully lift up the wiper at the collar assembly.
Step 2
Coat the upper post under the collar with a thick film of Slick Honey.
NOTE: A small packet of Slick Honey is included with After-Market Tranfer Neo Seatposts for this simple grease procedure.
Step 3
Press the wiper in by hand to fully seat it against the collar assembly. Clean the exterior of the post and check for proper function.
Cycle the seatpost 2-3 times through its travel, then wipe off any excess Slick Honey from the exterior of the seatpost.
