SETUP & INSTALLATION

The video below guides you through the basic installation of the LIVE Valve system. Please see below for additional frame-specific details for certain applications.

Scott Spark/Genius Specific Controller Mounting

FOX LIVE Valve kits for Scott Bikes include the required Contoller Pedestal and Frame Grommet as shown below.

All AM Scott LIVE Valve applications will require the Controller Pedestal mount as shown below. Route all controller cables through the Pedestal, then route the cables through the frame grommet as shown. Make sure to route the cable going to the rear shock out through the top of the frame grommet as shown.

Scott Spark Specific Rear Sensor Mounting

FOX LIVE Valve kits for the Scott Spark/Spark RC contain the LIVE Valve specific rear brake mount with integrated mount for the rear sensor (shown below). This is configured as a direct Post Mount for 160mm brake rotors. Please utilize a standard Post Mount brake adaptor to accomodate different size rotors. Please contact your brake manufacturer for additional information on your braking system.

Scott Spark/Spark RC Headtube Cable Guides

FOX LIVE Valve kits for the Scott Spark/Spark RC contain the required LIVE Valve specific headtube cable guides as shown below. Please see the diagram below to identify the Scott parts needed for correct LIVE Valve cable routing.

Pivot Mach 5.5 Headtube Cable Guides

FOX LIVE Valve kits for the Pivot Mach 5.5 contain the required LIVE Valve specific headtube cable guides as shown below.