SERVICE PROCEDURES

2018+ Remote Installation (FIT4, GRIP, FLOAT DPS)

WARNING: Always wear safety glasses and protective gloves during service to prevent potential injury. Failure to wear protective equipment during service may lead to SERIOUS INJURY OR DEATH.

FIT4 and FLOAT DPS Remote Installation (Dual Cable Push-to-Unlock)

Step 1

The video below guides you through the process of installing the 2018 2-position remote lever with dual cables to the FIT4 Push-to-Unlock remote fork damper cartridge and the FLOAT DPS rear shock.

 

Grip and FLOAT DPS Remote Installation (Dual Cable Push-to-Lock)

Step 1

The video below guides you through the process of installing the 2018 2-position remote lever with dual cables to the GRIP remote fork damper cartridge with cable exit at the rider's 1 o'clock position and the FLOAT DPS Remote rear shock in Push-to-Lock configuration. All 2018 GRIP remote fork dampers are Push-to-Lock.

 

 

GRIP Remote damper lockout blow-off force can be adjusted via the inline barrel adjuster. 

Step 1

The video below guides you through the process of installing the 2018 2-position remote lever with dual cables to the GRIP remote fork damper cartridge with cable exit at the rider's 7 o'clock position and the FLOAT DPS Remote rear shock in Push-to-Lock configuration. All 2018 GRIP remote fork dampers are Push-to-Lock.

 

GRIP Remote damper lockout blow-off force can be adjusted via the inline barrel adjuster. 

FIT4 Remote Installation (Push-to-Unlock)

Step 1

The video below guides you through the process of installing the 2018 2-position remote lever to the FIT4 Push-to-Unlock remote fork damper cartridge.

 

FIT4 Remote Installation (Push-to-Lock)

Step 1

The video below guides you through the process of installing the 2018 2-position remote lever to the FIT4 Push-to-Lock remote fork damper cartridge with cable exit at the rider's 1 o'clock position.

 

Step 1

The video below guides you through the process of installing the 2018 2-position remote lever to the FIT4 Push-to-Lock remote fork damper cartridge with cable exit at the rider's 7 o'clock position.

 

GRIP Remote Installation (Push-to-Lock)

Step 1

The video below guides you through the process of installing the 2018 2-position remote lever to the GRIP remote fork damper cartridge with cable exit at the rider's 1 o'clock position. All 2018 GRIP remote fork dampers are Push-to-Lock.

 

GRIP Remote damper lockout blow-off force can be adjusted via the inline barrel adjuster. 

Step 1

The video below guides you through the process of installing the 2018 2-position remote lever to the GRIP remote fork damper cartridge with cable exit at the rider's 7 o'clock position. All 2018 GRIP remote fork dampers are Push-to-Lock.

 

GRIP Remote damper lockout blow-off force can be adjusted via the inline barrel adjuster. 

FLOAT DPS Remote Installation

Step 1

The video below guides you through the process of installing the 2018 2-position remote lever to the FLOAT DPS Remote rear shock in either Push-to-Lock or Push-to-Unlock configurations.

 

WARNING: FOX products should be installed by a qualified bicycle service technician, in accordance with FOX installation specifications. If you have any doubts as to whether or not you can properly install the remote lever on your bicycle, defer to a professionally trained bicycle service technician. Improperly installed products can fail, causing the rider to lose control, potentially causing SERIOUS INJURY OR DEATH.

WARNING:  Make sure that the remote lever does not interfere with normal brake and shift lever operation. Failure to do so can result in loss of control, potentially causing SERIOUS INJURY OR DEATH.

WARNING: Make sure to leave enough cable housing length to accomodate normal steering operation. Failure to do so can result in loss of control, potentially causing SERIOUS INJURY OR DEATH.