SERVICE PROCEDURES
Transfer Neo Lever Replacement
Required Parts
- 803-04-040 Kit: 2025 Transfer Neo Lever Replacement Parts (Paddle, Spring, and Bushings)
Always wear safety glasses and protective gloves during service to prevent potential injury. Failure to wear protective equipment during service may lead to SERIOUS INJURY OR DEATH.
FOX products should be installed by a qualified bicycle service technician, in accordance with FOX installation specifications. If you have any doubts as to whether or not you can properly install the remote lever on your bicycle, defer to a professionally trained bicycle service technician. Improperly installed products can fail, causing the rider to lose control, potentially causing SERIOUS INJURY OR DEATH.
Step 1
Using your 3mm Hex Wrench, remove the Lever Pivot Bolt by turning counter-clockwise. Make sure to keep slight pressure on the paddle so that you don't loose the spring.
Step 2
Carefully remove the Spring and Paddle
Step 3
Install replacement Lever Paddle and Spring.
Step 4
Reinstall Lever Pivot and tighten clockwise to 8 in/lbs (0.9 Nm) torque.
